choose to suit coal iron Magnetic Separator in sorting the technical advantages

In the separator, because you can use U effects thrust and adaptation range is very wide, so the sorting iron has a very impressive gold processing equipment technical advantages. Such as Central Asia, large machinery CTDG type magnetic separator iron mines, and its excellent performance and manufacturing are called, has been in many large and small magnetite selected field has been applied. Mine broke the iron magnetic separator iron mines original drum magnetic separator design principle, the use of open-rocking complex magnetic system enhances the sorting process intensity and speed of the magnetic flip, improved separation efficiency in recent years, magnetic separation equipment developed new products, and its truly no water, no pollution, no aggregation, sorting net, less tailing, high grade, lo w cost, excellent results, has won three national patents.

Magnetic separator iron mines used in today s high-performance NdFeB material as the best magnetic source. NdFeB material has a high magnetic field strength, magnetic blocks single block of up to 5000 gauss magnetic field strength, high magnetic field strength to ensure the recovery of the first channel, a strong and stable magnetic source and high-performance circuit design, the iron In the dressing over 95% of the recovery process; magnetic stability in harsh working environments can maintain lasting stability.
magnetic drum separator
Magnetic separation principle is to be elected into the mines to other materials in addition to iron magnetic separator sorting space, by force and other mechanical forces (such as gravity, centrifugal force, friction, medium resistance, etc.) of the joint action. Suffered magnetic mineral particles s ize and mineral magnetism magnetism itself relevant; non-magnetic mineral particles mainly by mechanical force. Consequent, each movement along different paths, to get separation. Generally suffered magnetic particles in a magnetic field than the size of the magnetic force is proportional to the field strength and gradient.

In recent years the state protection of water resources has intensified, so I plant mainly iron magnetic separator in mine development down the foot work, and constantly develop the latest developments to meet market demand type magnetic iron ore mines machine, the device once the user has made considerable economic benefits, and by the new and old users alike, with coal iron magnetic separator continues to develop, Yu sent mine will conform to the trend of the times, and constantly develop the most advanced coal iron magnetic separator for iron ore selection of recovery operations to provide strong support, and for the steel mills, ironworks, power plants, cement, metallurgy and mineral sand, Sand Hill mine, sand mining, and many other industry s most energy-efficient magnetic iron removal equipment.
suspension magnet
Magnetic separator iron mines used in today s high-performance NdFeB material as the best magnetic source. NdFeB material has a high magnetic field strength, magnetic blocks single block of up to 5000 gauss magnetic field strength, high magnetic field strength to ensure the recovery of the first channel, a strong and stable magnetic source and high-performance circuit design, the iron In the dressing over 95% of the recovery process; magnetic stability in harsh working environments can maintain lasting stability.

Coal iron magnetic separator can be applied early in the lean iron ore broken or subsequent roughing, excluding waste rock; iron in iron smelting for sorting before; hematite reduction roastin g operations will not fully closed reduction ore for re-election; foundry industry in the old sand iron work. Porcelain clay for ceramics in the mixed iron removal; used for the removal of iron mixed in coal. Coal iron magnetic separator can be applied early in the lean iron ore broken or subsequent roughing, excluding waste rock; iron in iron smelting for sorting before; hematite reduction roasting operations will not fully closed reduction ore for re-election; foundry industry in the old sand iron work.
Magnetic Head Pulley
Of China s iron ore resources, 80% of the ore needs to be applied magnetic separation. How to improve the magnetic efficiency and achieve the maximum recovery of iron, the magnetic sector is an important issue to be solved. The coal mine magnetic iron separator as the main equipment and the carrier, its performance determines the efficiency of magnetic separation. Th erefore, many domestic machinery research departments have to look into mine iron magnetic separator in the development and improvement. At present, the domestic coal iron magnetic separator more categories, according to their field strength and the strength of the magnetic field strength, generally can be divided into iron mine field separator (magnetic field strength H = 80 ~ 120kA / m) and strong magnetic fields coal iron magnetic separator (magnetic field strength H = 800 ~ 1600kA / m)

PVC compound stabilizer

Pure PVC resin is extremely sensitive to heat, when the heating temperature reaches 90Y: more, the thermal decomposition occurs slight reaction when the reaction temperature rose to 120C after decomposition intensified in 150C, 10 分钟, PVC resin, the original white gradually turns yellow - red

- Brown - black. PVC resin decomposition process is due to de-HCL reaction caused a chain reaction leading to macromolecules strand breaks. Prevent the thermal stability of PVC thermal decomposition mechanism is through the following aspects to achieve.
(1) by thermal decomposition of PVC capture HCl, to prevent degradation of the catalytic HCl. Click mechanisms lead salt major role, in addition to metal soap, organic tin, pho sphorous and other lipids and epoxy.
(2) replacement of reactive allylic chlorine atom. Metal soap, phosphorous lipids and organic tin can click here Mechanism effect.
(3) react with free radicals to terminate radical reactions. Organic tin and phosphorous mechanism of lipid Click role.
(4) and conjugated double bond, inhibiting the growth of conjugated chain. Organotin mechanism with epoxy Click role.
(5) peroxide decomposition, reducing the number of free radicals. Organic tin and phosphite Click Mechanism effect.
(6) de HCl passivating effect of a catalytic metal ions.
   With a stabilizer according to several different mechanisms for thermal stability purposes.
   Heat stabilizers Varieties - composite stabilizer
   Composite stabilizer can be divided into the following categories:
1 Liquid Ba-Zn composite stabilizer are generally pale yellow to yellow-brown oily liquid, specific gravity of 1.0-1. 1 at room temperature, good heat resistance, pollution from sulfur, with an epoxy plasticizer and used to increase the stabilizing effect, it activation of the blowing agent.
2 liquid calcium zinc composite stabilizer nontoxic liquid calcium zinc stabilizers main ingredients are calcium stearate, castor oil, calcium, zinc stearate, castor oil, zinc and epoxy soybean oil, ultraviolet absorber. Hugh liquid calcium zinc stabilizers are generally used more soluble in organic

Solvent is an aliphatic carbon number of less fat calcium and zinc. Because of different compositions, varied in nature, usually pale yellow to yellow clear oily liquid at room temperature under a specific gravity of 1.0 to 1.05. It is non-toxic PVC stabilizer , mainly used for food packaging films, containers bubble people

Artificial leather stabilizer.
3. Liquid and liquid barium cadmium, barium cadmium zinc composite stabilizer, such composite stabilizer is mainly used for the processing of soft PVC products, the basic components include: (a) barium salt - can be alkylphenols barium, 2 - ethylhexanoic acid, barium, barium laurate (powder lamination), benzoic acid and substituted

Benzoic acid, barium and barium neodecanoate. Barium salt complexes accounted for 6-7%, ie cadmium salts ratio is around 2:1-32 (with metal in mind that weight percent, the same below). (2) cadmium salts - can be 2 - ethylhexanoic acid cadmium, cadmium lauric acid, oleic acid cadmium, phenyl and substituted benzoic acid

Cadmium, cadmium naphthenate, neodecanoate, and cadmium. Cadmium salt complexes about 3-4%. (3) zinc - can be 2 - ethylhexyl zinc, zinc laurate (powder lamination), zinc naphthenate, zinc neodecanoate, benzoic acid and substituted benzoic acid and zinc. Accounts for the composite zinc

0.5-1%. (4) phosphite - may be triphenyl phosphite, diphenyl phosphite, an octyl diphenyl phosphite, a decyl phosphite, tris (nonylphenyl), etc. In the phosphite complexes about 15-20% (by weight), as a chelating agent. (5) Other - including a small amount of

2,6 - t-butyl-p-cresol, bisphenol A, nonylphenol and other phenolic antioxidants and ultraviolet absorbers, and a liquid paraffin, white oil, diesel oil, mineral oil, spindle oil as solvent, and the need Add a small amount of antifoaming agent such as higher alcohols.
   Liquid barium cadmium zinc composite stabilizer because different composition, properties are also different. But is generally pale yellow to yellow clear liquid, specific gravity 0.95-1.02 at room temperature, the viscosity of less than 100 cps, freezing point at -15 ℃ or so. Liquid barium cadmium and liquid barium cadmium zinc are similar to each

Excellent thermal, light stability, initial coloration is small, good transparency and color stability. Their stabilizing effect than solid composit e soaps, therefore, may reduce the amount of, usually 2-3 parts, the dust does not occur poisoning, and completely dissolved in the plasticizer generally have

Good dispersion, the precipitation tendency of small. Wherein the liquid barium cadmium zinc early color than the liquid barium cadmium smaller.
4 lead salt composite stabilizer good thermal stability, has been widely used, but small lead salt powder, ingredients and mixed in its dust is inhaled can cause lead poisoning, for which they have developed a new type of scientific and technical personnel The composite lead salt heat stabilizer. This compound additive

Reaction technique using a symbiosis of the three salts, di-salt and the metal soap in the reaction system in the nascent grain size and various lubricants be mixed to ensure the PVC heat stabilizer system in the fully dispersed, and because of the lubricating agent of melting gr anular, but also to avoid

A result of lead poisoning caused by dust. Inclusive of lead salt stabilizer compound required processing heat stabilizer component and a lubricant component, known as a full package heat stabilizer. It has the following advantages: (1) compound heat stabilizer various components can be obtained in the course of production

Sufficiently mixed with the resins greatly improved the uniformity of dispersion. (2) mixing formula, simplified measurement frequency, to reduce the probability and the resulting measurement error caused by the loss. (3) a simple supply and reserve materials, is conducive to production and quality management.

(4) provides the possibility of clean production of products, improving production conditions.
    Composite stabilizer security issues
    PVC compound stabilizer security issue has been more and more people s attention. PVC compound stabilizer securit y should be three aspects to consider, first, the safety of using the processing of raw materials, the second is the user s security and the third is the safety of waste on the environment. Plus

Workers safety protection may be liquefied by stabilizing agent, paste technology, granulation and other measures to solve them. , Security protection for the user, can be prepared by a stabilizer or a reactive high molecular weight stabilizers to improve its resistance to pumping, but taking into account the effect of stabilizing the molecule

Class of chemical reactions, the above method is not the most appropriate method, the best method is still used high-security stabilizers. Stabilizer is selected, the stabilization process must also be considered in the resin and stabilizing agent, or stabilizers react with each other chemicals generated

Security.
From a variety of security stabilizers see, cadmium stabilizers in the near future will be di scontinued. But a slow process, one of the reasons is that most in the use of cadmium stabilizers when costs are increased by 10% -20%, and cadmium-based stabilizers can not be common to a wide range

The PVC compound. Such as processing a narrow range, but also often need to use auxiliary stabilizer compensate for its performance deficiencies. Now cadmium stabilizers performance has reached a performance of cadmium stabilizers. Calcium zinc stabilizers have been developed rapidly. And in powder, paste and liquid, and

Standard and non-toxic level for sale, second-generation calcium zinc stabilizer in food and pharmaceutical packaging has been replaced by methyl tin tin and zinc base.
Lead stabilizers set its extraction resistance is small, so the use of security when not a problem, but there are security issues harm the environment. Because lead-based stabilizers, low cost, high efficiency, many companies are using this, along with non-lead PVC comp ound stabilizer development, lead salts being no

Environmental toxicity replaced stabilizer. As many countries ban lead, lead-based stabilizers are withdrawn from the market
In short, the composite heat stabilizer help scale production, lead salt heat stabilizer for the development of a new direction. Lead salt stabilizer compound is an important indicator of lead content, current production of lead lead salt stabilizer compound is generally 20% -60%; in PVC plastic door

Window profile production on the amount of 3.5-6 parts

Oxidized polyethylene wax emulsion

 oxidized PE WAX  First, oxidized polyethylene wax emulsion technical indicators: 1, solid content: 30% -40%; 2, Appearance: light yellow homogeneous liquid; 3, PH value :8-9; 4 Stability: non-hierarchical, not broken milk, no caking.
Second, oxidized polyethylene wax emulsion Applications: oxidized polyethylene wax emulsion used in water-based ink, water-based varnish, agriculture, leather, shoe polish, forestry, wood, garden industry, water-based paint, water-based paint, paper products, adhesives, textile fabric softener and water throughout

Management and other fields.
Third, oxidized polyethylene wax emulsion characteristics: oxidized polyethylene wax emul sion diluted with water in any proportion not hierarchical, not breaking, no caking, acid, alkali, resistance to hard water, soluble strong, emulsion stability, long shelf life, solid content, good dispersion, oxidized polyethylene wax

The emulsion has good scratch resistance, water resistance, stain stick, wear, soft, surface lubrication performance.
Fourth, oxidized polyethylene wax emulsion to use: Spray uniformly oxidized polyethylene wax emulsion for leather, fabric surface, recommended dosage of 5% -10%, the specific dosage may be adjusted according to your product against the system as appropriate.
Five, oxidized polyethylene wax emulsion Packing: 50KG / barrel 200KG / barrel 1000KG / drum or tank
Sixth, the use of advanced production technology and top made ??of advanced materials polyethylene wax emulsion. Having a small particle size (transparent microemulsion), waterproof, coating hardness, sticky, is paint, leather, textiles, excellent i nk additives. It can also be used

Ink, polish, wax polish, liquid shoe polish, liquid car wax polish, liquid floor wax and liquid leather jacket oil fields.  oxidized polyehtylene

Solenoid Valve Precautions

Web Design And Seo For www.china-webdesign.com

solenoid control valve - China Manufacturer

Thank you for inquiry my solenoid control valve, Tel:0086-574-88869817, Email:jelpc@jelpc.com

http://www.jelpc.com/key-solenoid-control-valves-10/

 I. Security:
1 corrosive media: king should use plastic solenoid valves and stainless steel; For highly corrosive media must use isolation diaphragm. Neutral medium, it should use copper alloy m aterial solenoid valve casing, otherwise the housing desquamation often rust, especially the action infrequent

Occasions. Ammonia can not be used with the valve copper.
2 Explosive environment: to choose the appropriate proof grade products, outdoor installation or dusty places should use waterproof, dustproof varieties.
3 solenoid valve nominal pressure should exceed the maximum working pressure of the tube.
    Two. Applicability:
    1 media characteristics
1) The quality of gas, liquid or mixed states, which are used in different varieties of solenoid valves.
2) Medium temperature different specifications, otherwise the coil will burn, seals aging, seriously affecting the life of life.
3) medium viscosity, usually 50cSt less.
4) Media cleanliness is not high when the electromagnetic valve should be installed before the recoil filter valve, low pressure fashion can choose straight diaphragm s olenoid valve.
5) If the directional flow medium, and not allowed back.
6) medium temperature should be chosen within the allowable range solenoid valve.
    2 pipe parameters
1) under medium flow pipe connection requirements and mode selection valve openings and models.
2) According to the selected flow and valve Kv value DN, also optional with pipe diameter.
3) Working pressure
Minimum working pressure at 0.04Mpa above is optional indirect Pilot; minimum working pressure close to or less than zero must be selected direct-acting or step direct type.
    3 Environmental Conditions
1) Setting the maximum and minimum temperature should be selected within the allowable range.
2) the environment of high relative humidity and a drop of rain and so on, should be selected water solenoid valve
3) the environment, often vibration, bumps and shocks occasion should choose special varieties.
4) in a corrosive or explosive environment should be given priority in the use of safety requirements according to selected anti - hair loss
5) If the restricted environment of space, please use the multi-function valve, because eliminating the need for bypass and three manual valves and easy online service.
    4 Power Conditions
1) According to the power supply types were selected to AC and DC solenoid valve . Generally AC power access convenient.
2) voltage specifications.
3) Power supply voltage fluctuations are usually used% 10% -15%, DC to allow ±% 10 or so.
4) should be based on the rated power capacity current and power consumption. VA should be noted that when starting the exchange value is higher, the lack of capacity should be preferred indirect electromagnetic valves.
    5 control accuracy
A) ordinary solenoid valve only opening and closing two locations in the control of high precision and parameters for a smooth, please choose a number of solenoid valve; three normally open solenoid valve, with Weiqi, fully open and close three kinds of traffic;
Combination of multi-valve with open, wide open, small open, open four traffic.
2) Operating time: refers to connect or disconnect signal to the main valve action completion time.
    Third, Reliability:
1, working life, this is not included factory pilot project, are type tests.
2, Operating mode: sub-long work, repeated short-time work and short-time work three.
3, Operating frequency: frequency of demanding action, the structure should be optimized direct acting solenoid valve, the power to listen to the exchange preferred.
4, operating reliability: rigorous professional standards solenoid valve.
    Four. Economy:
   It selects one of its scale, but it must be in a safe, suitable and reliable bas ed on the economy. Economy is not only the price of products, but also to give priority to their functionality and quality of installation and maintenance and other accessories required fees.
    V. Environmental protection:
    Environmental pollution and solenoid valves for corrosive fluids, external pilot valve diaphragm valve can be replaced in pollution and work under high viscosity fluids can also have a longer pot life and the body of the actuator diaphragm seal isolates the working fluid and the executing agency for
To pollution and corrosive fluids.

Solenoid valve

Web Design And Seo For www.china-webdesign.com

solenoid control valve - China Manufacturer

Thank you for inquiry my solenoid control valve, Tel:0086-574-88869817, Email:jelpc@jelpc.com

http://www.jelpc.com/key-solenoid-control-valves-10/

solenoid directional valve Action
Transformation heart valve in the valve body relative to the working position, the oil port of the valve body connected or disconnec ted, the actuator to control commutation or the start and stop.
Performance requirements
1 commutation performance within the specified operating conditions, the solenoid valve is energized can reliably commutation, can reliably reset after power failure. (2) the pressure loss by the solenoid valve pressure loss of fluid flow through the valve port solenoid valve flow generated when the throttling losses and loss

Missing components. 3 solenoid valve of the internal leakage amount is the amount of internal leakage in the specified operating conditions, in different working positions, from the high pressure chamber to the low pressure chamber of the amount of leakage. 4 commutation and reset time from the solenoid valve is energized to terminate the commutation

The time required for the reset time is the power from the electromagnetic valve to return to the initial position to the desired time. 5 commutation frequency in the unit time by the max imum number of 6 commutation. Life to the primary solenoid valve with damaged parts, can not be positive

Normal commutation and reset action, or to its main performance indicators deteriorated significantly exceeds the specified index experienced commutation times.
Classification
A wide variety of solenoid valve, according to their number of operating positions and the number of how many channels can be divided into two three-way, two-way, three-way, etc.; their reset and positioning can be divided into spring return, steel ball positioning, without reset spring; accordance with the solenoid valve

The connection can be divided into flanged and threaded connections; press it with electromagnet structure can be divided into dry and wet, each of which have AC, DC, the entire form, and the required power supply voltage and has a good variety, which in its structure, there are many differences

. 1 Press the number of interfaces and switc hing position classification interface refers to the number of valves on a variety of tubing connected to the inlet and outlet, the inlet is usually labeled as P, oil return port is labeled as R or T, the oil port places A, B to represent. Valve spool movable Number of Positions Number of Positions called switch, normally I

We will interface is called a "pass", the spool position is called a "bit." Therefore, according to their number of operating positions and the number of how many channels can be divided into two three, two-way, three-way, etc. (2) Classification by mode of operation to promote the movement of the valve spool with a hand power

, Feet, mechanical, hydraulic, electromagnetic and other methods. 3 categories according to their form of reset and positioning can be divided into spring return type, steel ball positioning, no reset spring. 4 in accordance with the form of the body and the solenoid connections can be divid ed into categories and threaded flange

Connection. 5 Press with solenoid structure their classification can be divided into dry and wet. Classify it: according to the form of the structure: poppet-type valve, spool-type valve, rotary valve type valve
Edit this paragraph structure types
In the hydraulic system is widely used in spool type valve, this valve in here introduces several structures. 1 manual valve: manual valve is to use the manual lever to change the spool position to achieve commutation of two. Motorized valve: also known as OK

Way valve, it is mainly used to control the stroke of hydraulic mechanical moving parts, which is mounted on the table by means of a stopper or cams to force the spool is moved, so as to control the oil flow. Motorized valve is usually two, there are two-, three, four and five-pass

Several, including two two three-way motorized valve is divided into two kinds of normally closed and normally open. 3 solenoid valve: the use of an electromagnet pass, power directly promote the spool to control oil port connectivity state. 4 hydraulic valve 5. Electro-hydraulic valve: the solenoid valve and the hydraulic valve

Combination. Solenoid valve play a leading role, it can change the direction of the control flow, thus changing the position of the hydraulic valve. By operation of the hydraulic thrust of the hydraulic valve can be large, and the main valve can be made very large, allowing a greater flow rate through the

Too. This can be controlled with a small electromagnet larger flow. 6 proportional directional control valve is a proportional solenoid valve in the electromagnetic valve unit outside the electromagnetic force generated by the coil to control the movement of the spool, relying on the control coil current to control the direction of the valve the valve

Displacement of the core, it can control the oil flow direction and flow. Spool type valve 1 valve structure and working principle structure Body: multiple levels undercuts the cylindrical bore Spool: multiple segment ring groove cylinders classification work

Number of points for the position (relative to the valve body of the valve core operating positions): two, three, four points by the number of paths (the main body of external connection port number, not including controlling oil and drain port): two pass, three, four, five pass by control points:

Electromagnetic, hydraulic, electro-hydraulic, mechanical, manual graphic symbols meanings: 1 - a grid that several of the few squares 2 pass - ↑ nowhere - ┴, ┬ both arrows and symbols with a side intercept There are several intersection is a few grid

Pass. Three ports have a fixed orientation and meaning: p - inlet (left) T - back to the oil port (bottom right) AB - work connected with the actuator port (left and right) 2. Slide valve in median function slide val ve function: valve is in the normal position

The valve in the oil port connectivity way valve that is on the three middle way of the oil port connectivity, so called median function. Median function: three valve in the neutral position, the valve means of the communication ports.  two way solenoid valve

Steam solenoid valve synopsis

Web Design And Seo For www.china-webdesign.com

pneumatic fitting - China Manufacturer

Thank you for inquiry my pneumatic fitting, Tel:0086-574-88869817, Email:jelpc@jelpc.com

http://www.jelpc.com/key-pneumatic-fittings-11/

Steam solenoid valve into the boiler steam - saturated steam, thermal power plants out of steam - superheated steam two kinds. Steam solenoid valve is widely used in textile, printing, chemicals, plastics, rubber, pharmaceutical, food, building materials, mach inery, electrical equipment, surface treatment and research sectors and

Bathroom, dining room, air conditioning and other automation systems.
Structural features
Second pilot valve solenoid valve opening by the Vice-valve and the main valve assembly consisting of two
Heat: Electromagnetic parts, seals, some with special high temperature electrical materials and sealing materials, and the application of a variety of insulation measures
Wear: rational selection, valve cup and a guide suites clever use of fluid lubrication, reduce wear and increase life expectancy
Resistance to cold: steam pipe on the steam condensate is an important factor in the operation of the solenoid valve, the valve is not affected condensate
Works
1 Step steam solenoid valves is direct action pilot solenoid valve, according to the power at which the on and off states of different, can be divide d into the normally closed and normally open solenoid valve solenoid valve.
2 normally closed steam solenoid valve coil is energized, the armature of the electromagnetic driving force of the first vice valve Seti, the main valve on the cup fluid flow away through the auxiliary valve, reducing the role of the main valve pressure on the cup When the main valve to reduce the pressure on the cup to a certain value, the armature with

Move the main valve cup, and use pressure leaving open the main valve cup, medium flow. Coil power, the electromagnetic force disappears, the armature due to weight whereabouts reset. Also rely on media pressure, primary and secondary valve to close off.
3 steam normally open solenoid valve, the suction effect of the coil is energized, the plunger down, the sub-pressure valve plug, the pilot valve closed, the main valve cup pressure rise, when the pressure rose to a certain value, the main the vertical pressure valve cup, as a re sult of electromagnetic force, the movable core

Lost under the main valve cup, pressing the main valve seat, the valve closes. Coil power, the electromagnetic suction zero, deputy branch valve plug and the core role of the spring lift, vice valve is opened, the use of pressure to the main valve cup push up, the main valve is opened, medium flow.
Steam solenoid valve is installed
1, less rigid in the pipeline case, we recommend using the valve before the pipe bracket to prevent vibration caused when the solenoid valve work.
2, steam solenoid valve working media should be clean and free of particulate impurities, solenoid valve and dirt on the surface of the filter, to be periodically cleaned.
3, in the steam solenoid valve failure, in order to prompt isolation solenoid valves, and to ensure proper system operation, best to install a bypass device.
4, in the piping system, installed in the branch circuit electromagnetic valve size should be smaller than the main channel of the valve bore.
5, when installing the solenoid valve coil up and maintain the vertical position, the solenoid valve on the arrow or mark shall be consistent with the pipeline flow may not be installed in a place where splashing or leaks.
6, can not be steam solenoid valve installed in the pipeline low recess so as to avoid condensation of water vapor, impurities precipitate in the valve and prevent movement.
7, ordinary type can not be used in hazardous environments.
8, before installing steam solenoid valve, pipe must be cleaned. Recommended valve installed before the filter, steam trap piping installation.
9, before installation, pay attention to see the product label, carefully read the instruction manual to determine whether the products meet the conditions of use.
10, steam solenoid valve pressure gauge should be installed around the pipe in order to observe the pipeline pressure.  solenoid valve

гематит магнитные характеристики сепаратора и характер магнитного Введение явления

Характеристики сепаратора устройства заключаются в следующем:

1 энергосберегающее: процесс эксплуатации оборудования потребляет лишь небольшое количество электрической энергии, нет потребления тока возбуждения.

(2) Высокая производительность: магнитная система с открытым магнитным дизайна кольцевые магниты системы, мощностью переработки минерально го сырья, материала без засорения.

3 защищенные и долговечные магниты: Магнитная система не защищена в барабан, а материалы в непосредственном контакте, легко защитить магнит, оборудование операционных затрат.

4 магнитных минералов, слабые магнитные минералы (с живым телом) все машины могут быть извлечены: эффект очистки, для достижения полноценного минерального магнитной сепарации, и хвостов меньше остатка.

. 5 Удобная сыпучих материалов, разделение: Динамический магнитной системы, магнитные минералы в барабане пов� �рхности скольжения смещения и акробатика, эффект очистки на барабане с барабанные палочки материала,

И облегчить магнитного материала и улучшить качество концентрата.

То же самое однородное магнитное поле, единицу массы материала за счет магнитной силы от направления и магниты постоянные интенсивности, чтобы определить силу магнитного вещества. Потому что любая материя имеет магнитное

Природа, любое вещество в неоднородном магнитном поле будут подвергаться магнитной силы.

Для того , чтобы получить признание рынка и одобрения пользователем, мы решили не использовать порошок железа сухой магнитный сепаратор добавляет высокие магнитные свойства силы индукции. Так что он имеет несколько различных

Удобство характеристики пользовательских приложений.

Например, это сепаратор может быть применен в начале постное железной руды сломанной или последующих черновая, за исключением пустых пород, в железной руде для выплавки чугуна до сортировки; закрытая репозиция гематита

Дорога обжига операции не б� �дут полностью восстановить руду переизбрания; литейной промышленности в старых железом песком. Фарфоровая глина для керамики в смешанном удаления железа; на уголь

Смешанные в обезжелезивания. Использовать в другом месте, потребность в железе работы.

Магнитный сепаратор магнитные свойства магнитной системы магнитный сепаратор магнитной системы плотности магнитного потока между размером и пространственное распределение. Магнитные свойства и магнитные системы магнитного потенциала размер магнитных

Форма и раз� �ер электрода. Для того чтобы получить хорошие магнитные показатели, магнитная система распределения поля должны быть разумными, что имеет разумную магнитные свойства. Исследования и определения магнитных свойств

Значение понимания напряженности магнитного индукционного и распределение напряженности магнитного поля, а глубина их роли, то есть размер их объем, для того, чтобы определить соответствующий

Полюс структуре параметров и условий процесса сортировки.

Тип магнитный сепаратор магнитной системы существую т два типа магнитноймагниты ферритовые  системы, магнитные системы, которая является открытой и закрытой магнитной системы. Разные виды имеют разные магнитные системы магнитных свойств. Поляки в открытой магнитной системе

Расположено рядом с одной стороны, и полюсов не было магнитный носитель, большой воздушный зазор, силовые линии магнитного поля в открытом пространстве состояний, так называемый открытым магнитной системы; замкнутую магнитную систему, выполненную с противоположными пол� �сами

, Очень маленький воздушный зазор между силовыми линиями магнитного поля в небольшом замкнутом пространстве, то она называется замкнутой магнитной системой.

Слабые магнитный сепаратор магнитной системы с открытым. Общие открытой магнитной системы магнитных полюсов, расположенных на плоскости или криволинейной поверхности двух типов, они полюса или полюс вдоль зазора между плоскостью симметрии

Изменение плотности магнитного потока магнитного поля с магнитной формула индекса системы.

Магнитное склон ение угол слишком большой слишком мал не хорошо, слишком мало влияния на качество концентрата, магнитные частицы имеют меньшие шансы быть избранным не придумали, но и сделает хвостов класса нижнем правом обратно

Хороший выход; угол слишком велик, чтобы улучшить качество концентрата хорошо, потому что только магнитные частицы имеют большую вероятность быть выбранным вверх, нет никаких шансов на магнитных небольшой и

В хвостах, хвостов класса увеличить, уменьшить темпы восстановления. Установленные шины склонны к ослабле нию всегда должны быть проверены.

Магнитный сепаратор используется всегда должны проверить все части смазки винтов и технического обслуживания, особенно там, где есть поворот часто заполнением маслом, маслом. Магнитный сепаратор

Весь плечо несущей станка, таким образом хорошую смазку подшипников продолжительность жизни имеет большое влияние, она непосредственно влияет на срок службы оборудования и интенсивность эксплуатации больших

Маленький, и поэтому требует вводят масло должно быть чистым, чистым, смазочное масло имеет хорошее уплотнение, обедненный железной руды магнитного сепаратора вращающиеся подшипники, роликовые подшипники, все шестерни, живут

Dynamic Bearing, плоскости скольжения и так нужно иметь хорошую смазку. Масло деталей машин в смену плюс с низкой температурой плавления глаза на основе кальция смазки. Температура подшипника масла следует контролировать в

Заданном диапазоне, слишком легко привести к повреждению подшипников. Установите основание плоскости перемещения устройства не могут иметь пыли и других матери� �лов, всегда протирать тело, очистить остаточный ленточный конвейер

Минералы и пыль, и т.д., чтобы держать устройство в хорошую рабочую атмосферу.

Подшипники: Подшипник дробилки плечу весь вес машины, поэтому хорошее смазывание подшипника жизни хорошие отношения, она непосредственно влияет на срок службы машины

И скорость работы, что требует введения смазочного масла должны быть чистыми, уплотнение должно быть хорошо, смазка машины в крупном двумя вращающимися подшипник, роликовый подшипник 3, все шестерни 4

, Д еятельность подшипников, плоскости скольжения.

Сильный магнитный сепаратор с замкнутой магнитной системы. Общие замкнутой магнитной системы с электромагнитным магнитной системы и железного сердечника магнитной системы двух видов. Основные магнитные полюса отдел целом плоскую одной пары полюсов зубьев,

Гиперболические пар полюсов, плоский над одной пары зубьев полюс, паз лицо более одного зуба пар полюсов, таком как магнитный пар полюсов и многополярный или сферические зубы и т.д.; соленоид магнитной системы, как прави� �о, два плоских пар полюсов. Эти

Магнитные свойства пар полюсов имеющихся теоретических формул или полуэмпирическим полу-теоретической формулы. Станок предназначен для тонкой слабо магнитной сепарации минеральных и дизайна, ослабление поля магнитного вала исключением

Утюг, 2:59 сильным Пьян Пьян ролик сортировка достижения разделения минералов. В основном используется для тонкой слабо магнитных минералов черновой, уборка мусора и выбрали. Так как магнитное поле, магнитная магнитная Перерыв

Выбор хороший, следоват ельно, являются популярной и широко используемой в слабых магнитных операций сортировки минерального гематита

В магнитном бак обезвоживания тяжести для уменьшения минеральные частицы, магнитная сила магнитного минеральные частицы ускоряются до скорости расчетов, а роль воды, чтобы предотвратить рост немагнитный

Изобразительных жильных шламов и расчетов, и превратить их в бачок с водой до магнитных частиц минерального разделены. В то время подъема воды может также сделать магнитные частицы минерального

Рыхлом � �остоянии, в котором смесь, чтобы избавиться от жильных, повышая таким образом концентрат класса.

Магнитная природа явления на самом деле за пределами основного хода электронов вокруг ядра движения, образовали круг вокруг ядра ток, этот ток создает магнитное поле катушки, он имеет атомный

Магнитный. Каждый атомный состав материала немного магнита. Внутри тела в целом соответствует многочисленные мелкие магниты случайным расположением атомов, их

Магнитные компенсировали друг друга, поэтому весь объект не обладает � �агнитными свойствами. Когда объект внутри небольшой магнит (атом) N, S полюс аккуратно расположены конец к концу, объектом концы

Формирование N-полюс и S-полюс, она имеет магнитные.

PVC stabilizer,one pack stabilizer,Heat stabilizer: Use aluminum hydroxide flame retardant

PVC stabilizer,one pack stabilizer,Heat stabilizer: Use aluminum hydroxide flame retardant: Use of aluminum hydroxide: Various aluminide materials, plastics, rubber and other flammable materials   flame retardant additives, paper,...